Anritsu Field Master Pro MS2090A - A-4 Informational Notifications

MS2090A UG PN: 10580-00444 Rev. U A-6
A-4 Informational Notifications
Audio must be turned on to record.
In Toolbar, Not Logged, Transient
Battery Over Charge Temperature.
In Toolbar, Not Logged, Persistent
Cannot start measurement without a connected Antenna.
In Toolbar, Not Logged, Persistent
Calibration abort is not allowed.
In Toolbar, Not Logged, Transient
Calibration temperature range exceeded. User cal has been disabled.
In Toolbar, Not Logged, Transient
Cannot turn power cal on.
In Toolbar, Not Logged, Transient
Concatenation has been aborted.
When user aborts concatenation of streaming metadata files
Connecting to access point.
In Toolbar, Not Logged, Persistent
Current USB Site Master model or serial number does not match active calibration settings. 1-Port ReadyCal
will be applied.
Pop-up, Not Logged, Transient
Custom SEM File Imported
In Toolbar, Logged, Transient
Density data not available in playback
In Toolbar, Not Logged, Transient
Disconnecting from Wi-Fi Network
In Toolbar, Not Logged, Transient
Disconnecting from Wi-Fi Network Failed.
In Toolbar, Not Logged, Transient
External reference detected - switching reference source to external
In Toolbar, Logged, Transient