Anritsu Field Master Pro MS2090A - Page 77

MS2090A UG PN: 10580-00444 Rev. U A-7
External reference disconnected – switching reference source to GPS
In Toolbar, Logged, Transient
External reference disconnected – switching reference source to internal
In Toolbar, Logged, Transient
External reference disconnected – switching reference source to Internal High
In Toolbar, Logged, Transient
File Does Not Exist
In Toolbar, Not Logged, Transient
File Recall Failed
In Toolbar, Not Logged, Transient
File Recalled Successfully
In Toolbar, Not Logged, Transient
File Save Failed
In Toolbar, Not Logged, Transient
File Saved Successfully
In Toolbar, Not Logged, Transient
File successfully saved as: filename
When saving a file (e.g., trace, setup)
File <filename> import successfully
In Toolbar, Not Logged, Transient. X represents the filename.
File <filename> export successfully
In Toolbar, Not Logged, Transient. X represents the filename.
Frequency setting is outside sensor range. Measurement performance is not guaranteed outside the range
of sensor. It is recommended to keep start and stop frequencies within range listed on sensor
Pop-up, Not Logged, Transient
The following options will expire in less than 24 hours (9xxx)
In Notifications bar
GPS reference detected - acquiring GPS
In Toolbar, Logged, Transient
GPS reference acquired - switching reference source to GPS
In Toolbar, Logged, Transient