A-4 Informational Notifications Instrument Notifications and Troubleshooting
A-8 PN: 10580-00444 Rev. U MS2090A UG
GPS reference disconnected – switching reference source to Internal
In Toolbar, Logged, Transient
GPS reference no longer available – switching reference source to Internal High
In Toolbar, Logged, Transient
IF Gain Cal completed
In Toolbar, Logged, Transient
Internal High reference no longer valid – switching frequency reference source to Internal
In Toolbar, Logged, Transient
Internal High reference no longer valid – switching time reference source to Internal
In Toolbar, Not Logged, Transient
Insufficient data. A map point is skipped. Setting a higher distance or increasing sweep time can help.
In Toolbar, Not Logged, Persistent
Initializing the USB VNA...
In Toolbar, Not Logged, Transient
Input greater than DMax: <value>
In Toolbar, Not Logged, Transient. The value can be start or stop.
IQ STREAM - Sweep paused while IQ stream is in progress
In Toolbar, Not Logged, Persistent
IQ CAPTURE - Sweep paused while IQ capture is in progress
In Toolbar, Not Logged, Persistent
Language successfully updated to <Language Name>
In Toolbar, Logged, Transient.
Language failed to update to <Language Name>
In Toolbar, Logged, Transient.
Limit recall initiated
When a limit setup file is selected for recall.
Limits are not available for circular graphs
In Toolbar, Not logged, Transient
Measurement changed. Trace recording stopped
In Toolbar, Logged, Transient
To Next Page
Loading...
