Instrument Overview 2-13 Tools Menu
MS2090A UG PN: 10580-00444 Rev. U 2-53
IQ Streaming
The IQ STREAMING menu allows you to concatenate an existing IQ metadata file (.dgzm) with a session of IQ
data files (.dgz) that were streamed to a USB device after the stream operation is complete. The data files must
all come from the same stream session.
1. Select IQ METADATA FILE and then select the file that you wish to concatenate with IQ data streams.
All of the data stream files in the selected directory will get concatenated with the metadata file.
2. Select the OUTPUT DIRECTORY and select the destination to store the concatenated files. Check the
DELETE SOURCE FILES box if source files need to be deleted.
3. Select START to begin the concatenation. The progress bar will indicate the relative progress.
Figure 2-55. IQ STREAMING TOOL
Note
Concatenating files can be time consuming depending on the streaming parameters and time. The
process can be much faster if performed on a PC using the remote user interface. Refer to
Appendix C, “PC Software” for details on using this application.
To Next Page
Loading...
