Anritsu MS2690 - EMD;EMD?

Chapter
４
Native Device Message Details
4-84
EMD/EMD?
Storage Mode (Trace E)
Function
This command sets the storage mode of Trace E.
Command
EMD mode
Query
EMD?
Response
mode
Parameter
mode
Storage mode
0
Off
1
Max Hold
2
Average
3
Min Hold
6
Linear Average
Details
This command is not available in the following cases:
•
During the Spectrum Emission Mask measurement.
•
During the Spurious Emission Mask measurement.
Example of Use
To set the storage mode to Average.
EMD 2
EMD?
> 2