Chapter
４
Native Device Message Details
4-18
ADJFILTERTYPE/ADJFILTERTYPE?
ACP Filter Type
Function
This command selects filter type for ACP measurement.
Command
ADJFILTERTYPE type,target
Query
ADJFILTERTYPE? target
Response
type
type, type
(When
target
is omitted: The former indicates the offset channel filter,
and the latter indicates the In Band filter.)
Parameter
type
Filter type
RECT
Rectangle Filter
NYQUIST
Nyquist Filter
ROOTNYQUIST
Root Nyquist Filter
target
Setting target
INBAND
Sets the In Band filter
OFFSET
Sets the offset channel filter
When omitted: Applies the same filter type to both the In Band
and offset channel filters.
Details
This command is not available when ACP Reference is set to Span Total.
Example of Use
To set the filter type to root nyquist filter.
ADJFILTERTYPE ROOTNYQUIST
ADJFILTERTYPE?
> ROOTNYQUIST,ROOTNYQUIST
To Next Page
Loading...
