Anritsu MS2840A - Measurement Results; List Display

3.8 Measurement Results
3-39
3
Measurement
3.8 Measurement Results
Measurement results are displayed. The measurement result display
depends on the settings of Frequency Mode (Refer to Section 3.2.1
“Frequency Mode”) and Layout (Refer to Section 3.5 “Setting the Measure
Function”).
3.8.1 List display
The measurement result is displayed with List display when Frequency
Mode and Layout are as follows:
Frequency Mode: List or Sweep
Layout: Table
[1]
[2]
[3]
Figure 3.8.1-1 Appearance of the Screen in the List Display Mode
[1] Parameter Area
3.8.1.1 Parameter Area
[2] Measurement Status Area
3.8.1.2 Measurement Status Area
[3] List Area
3.8.1.3 List Area