For Safety
iii
iiiiii
iii
For safety, do not open the equipment covers.
If repair is required, contact the sales representative, branch office, or
agent at the telephone number and address given in this document or in
the equipment operation manual.
Although not recommended by Anritsu Corporation, if it is really impera-
tive to open the covers for emergency repair, take great care not to touch
any dangerous parts.
Always request repair by a trained engineer who understands the haz-
ards.
Anritsu Corporation will not accept liability for any injuries sustained as a
result of opening the equipment covers.
CAUTION
Before changing the fuses, ALWAYS remove the power cord from the
poweroutlet and replace the blown fuses. ALWAYS use new T6.3A
fuses.
T6.3A indicates a time-lag fuse.
6.3A or F6.3A indicate a normal fusing type fuse.
There is risk of receiving a fatal electric shock if the fuses are replaced
with the power cord connected.
Changing Fuse
To Next Page
Loading...
