UL COPYRIGHTED MATERIAL –
NOT AUTHORIZED FOR FURTHER REPRODUCTION OR
DISTRIBUTION WITHOUT PERMISSION FROM UL
APPENDIX A
Standards for Components
Standards under which components of the products covered by this standard are evaluated include the
following:
Title of Standard − UL Standard Designation
Analog Instruments – Panelboard Types, Electrical – UL 1437
Appliance Wiring Material – UL 758
Attachment Plugs and Receptacles – UL 498
Bushings, Insulating – UL 635
Capacitors – UL 810
Capacitors and Suppressors for Radio- and Television-Type Appliances – UL 1414
Communications-Circuit Accessories – UL 1863
Conduit, Tubing, and Cable Fittings – UL 514B
Connectors, Component, for Use in Data, Signal, Control and Power Applications – UL 1977
Cord Sets and Power-Supply Cords – UL 817
Electromagnetic Interference Filters – UL 1283
Electric Fans – UL 507
Electrically Isolated Semiconductor Devices – UL 1557
Equipment Wiring Terminals for Use With Aluminum and/or Copper Conductors – UL 486E
Fuses, Automotive Glass-Tube – UL 275
Fuseholders – UL 512
Gaskets and Seals – UL 157
Ground-Fault Circuit-Interrupters – UL 943
Insulating Materials – General, Systems of – UL 1446
Low-Voltage Fuses, General: Part1–UL248-1
Low-Voltage Fuses, Class C: Part2–UL248-2
Low-Voltage Fuses, Class CA and CB: Part3–UL248-3
Low-Voltage Fuses, Class CC: Part4–UL248-4
Low-Voltage Fuses, Class G: Part5–UL248-5
Low-Voltage Fuses, Class H Non-Renewable: Part6–UL248-6
Low-Voltage Fuses, Class H Renewable: Part7–UL248-7
Low-Voltage Fuses, Class J: Part8–UL248-8
Low-Voltage Fuses, Class K: Part9–UL248-9
Low-Voltage Fuses, Class L: Part 10 – UL 248-10
Low-Voltage Fuses, Class R: Part 12 – UL 248-12
Low-Voltage Fuses, Semiconductor: Part 13 – UL 248-13
Low-Voltage Fuses, Supplemental: Part 14 – UL 248-14
Low-Voltage Fuses, Class T: Part 15 – UL 248-15
Marking and Labeling Systems – UL 969
Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures – UL 489
Optical Isolators – UL 1577
Panelboards – UL 67
Plastic Materials for Parts and Devices and Appliances, Tests for Flammability of – UL 94
Polymeric Materials – Fabricated Parts – UL 746D
Polymeric Materials – Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials
Used in Printed Wiring Boards – UL 746C
Polymeric Materials – Long Term Property Evaluations – UL 746B
OCTOBER 15, 2004 UL 458 A1
To Next Page