Need help?Do you have a question about the Ansul SharpEye 20/20MI-32-S-F and is the answer not in the manual?
General| Field of View | 90° horizontal / 90° vertical |
|---|---|
| Operating Temperature | -40°C to +75°C (-40°F to +167°F) |
| Detection Range | Up to 200 ft (60 m) to a 1 sq. ft. (0.1 sq. m) gasoline fire |
| Spectral Response | IR |
| Power Requirements | 24 VDC nominal (18-32 VDC) |
| Humidity | 0 to 95% RH non-condensing |
| Enclosure | Explosion-proof |
| Hazardous Area Approvals | FM, ATEX, IECEx, CSA |
| Detection Technology | Multi-Infrared (MIR) |
| Sensitivity | Adjustable |
| Operating Voltage | 18-32 VDC |
| Current Consumption | 100 mA typical, 150 mA max |
| Output Type | Relays (Fire, Fault), 4-20 mA stepped, HART |
| Housing Material | 316 Stainless Steel |
| Protection Rating | IP66/67 |
| Dimensions | 5.1" H x 4.3" W x 5.7" D (130 mm x 110 mm x 145 mm) |
| Weight | Approximately 6.6 lbs (3 kg) |
Manual must be read by all responsible for product use, maintenance, or servicing.
Overview of the Triple IR flame detector and its application in vehicle fire protection.
Lists specific model approvals including FM Approved status for different housing types.
Covers detection range up to 33 ft and high immunity to false alarms.
Explains IR3 technology, its three channels, and operational principles for fire detection.
Details the 20/20MI-32-S-F model, including its housing and key features.
Defines sensitivity based on fire size, fuel type, and time from ignition.
Specifies the horizontal and vertical fields of view for detection.
Lists radiation sources the detector ignores and their immunity distances.
Details specific immunity distance for welding operations.
Describes the 3-color LED indication for detector status.
Details alarm/fault relays and detector states (Normal, Warning, Alarm, Fault).
Explains the BIT process, checks performed, and fault indications.
Describes the 3-second delay before an alarm signal is sent.
Specifies voltage range and power consumption in standby and alarm modes.
Details the detector's connector pinout and usage for communication and signals.
Describes the stainless steel enclosure and its water/dust tight ratings.
Provides the physical dimensions and weight of the detector.
Specifies operating and storage conditions for temperature and humidity.
Details requirements for salt fog, dust, and vibration testing.
Lists EMC standards and compatibility requirements for radiated and conducted emissions/immunity.
Covers important guidelines for aiming, view, environment, and detector placement.
Steps for preparing installation, verifying components, and mounting the detector.
Procedures for initial power-up and testing the detector's self-test.
Essential safety notes for operating and maintaining the detector.
Procedures for cleaning, connector inspections, and periodic checks.
Guidance on diagnosing and resolving fault indications and false alarms.
To Next Page
