Antari B-100X - Machine Details; Technical Label Information; Bubble Fluid; Setting and Manual Operation

3
4. Machine Details
01. Finger Screw
06. Cable Remote Connector (B-100X Only)
02. Bubble Outlet
07. Indicator Light (B-100X Only)
03. Hanging Bracket
08. Power Switch
04. Adjusting Knob
09. Fuse
05. Fan
10. Power Input
5. Technical Label Information
Please read the technical label information on the back of the machine before operating it.
1. Model Name
5. Breaker/Fuse
2. Input Voltage
6. QR CODE for User Manual
3. Frequency
7. Serial No.
4. Rated Power
6. Bubble Fluid
CAUTION
Always turn off the power before filling the fluid box. Do not add flammable
liquid to the fluid box. If fluid gets inside the machine, please contact your local
Antari dealer for assistant.
 Only the bubble fluid manufactured by Antari can be used, do not mix or dilute the bubble fluid. Due to
improper storage or using other fluid might cause malfunction.
 The machine is tested and calibrated with the specific bubble fluid to get the best performance.
 The warranty on your bubble machine will be void if you use bubble fluid not manufactured by Antari.
7. Setting and Manual Operation
WARNING
Machine falling off might cause serious injury, please make sure it is secure
and firm on the overhead.
Step 1. Place the machine on a flat, level hard and well ventilated surface area and reserve at least 50cm open