Antari FT-200 - Technical Specifications; Technical Specifications Table

7
13. Technical Specifications
FT-200
Input Voltage
US Model: AC 100-120V, 50/60Hz 13.5A
EU Model: AC 220-240V, 50/60Hz 7.0A
Rated Power
1600W
Warming-up Time
7.5 minutes (approx.)
Fluid Consumption
270 ml/min (100% output)
Fluid Tank Capacity
2.4 Liters (0.63 Gallon)
Compatible Fluid
Antari FLP Fire Training Fog Fluid
Ambient Temp. Range
0°C – 40°C (32°F – 104°F)
Control Methods
Manual、Timer、DMX512、Wireless、Cable Remote (Optional)
Interface
XLR 5-Pin Connector (DMX)、Neutrik powerCON Connector (Power)
DMX Channels
1 Channel
Included Accessories
WTR-20 Wireless Remote
Optional Accessories
Z-3 Cable Remote
Dimension
L 301 W 195 H 414 mm (L 11.85 W 7.68 H 16.3 inch)
Weight
16.0 kg (35.28 lbs.)
14. Warranty Disclaimer
We guarantee the merchandise manufactured by us to be free from defect in material and workmanship for a period
of one year. Our obligation and liability under this warranty shall be restricted to repair or replacement at our
factory or local authorized dealer. We assume no liability of the products that are improperly used or used for any
purpose other than that for which they are specially designed. This warranty shall not apply to any merchandise
which has been repaired, altered or assembled outside our factory in any way so as in our judgment to affect its
performance, nor which has been subjected to misuse, negligence, or accident nor to any merchandise operated
contrary to our printed instructions. We will not allow or be liable of any loss or any damages of any kind in
connection with the use, sale, or repair of any merchandise purchased from us.
15. Machine Dimension