Antari W-508 - WTR-10 Wireless Remote (Standard)

4
01. Nozzle
06. Safety Ring
02. 2.8 Liter Fluid Tank
07. Dip Switch
03. Wireless/DMX Indicator Light
08. Power Switch
04. XLR 3-Pin Connector (DMX)
09. IEC Connector (Power)
05. W-1 Wireless Receiver
10. Machine Status Indicator Light
5. Technical Label Information
Please read the technical label information on the back of the machine before operating it.
1. Model Name
5. Breaker/Fuse
2. Input Voltage
6. QR CODE for User Manual
3. Frequency
7. Serial No.
4. Rated Power
6. Fog Fluid
CAUTION!
Always turn off the power before filling the fluid tank. Do not add flammable
liquid to the fluid tank. If fluid gets inside the machine, please contact your local
Antari dealer for assistant.
 Only the fog fluid manufactured by Antari can be used, do not mix or dilute the fog fluid. Due to improper
storage or using other fluid might clog the heater and cause malfunction.
 The machine is tested and calibrated with the specific fog fluid to get the best performance.
 Please empty the fluid in the tank before switching to another fluid to avoid mixing.
 Only the essence manufactured by Antari can be used, and add according to the ratio recommended by Antari
(Recommended ratio is 1:1000), if using other essence or different ratio might clog the heater and cause
malfunction.
 The warranty on your fog machine will be void if you use fog fluid not manufacture by Antari.
7. Setting and Manual Operation
WARNING
Machine falling off might cause serious injury, please make sure it is secure
and firm on the overhead.