EasyManua.ls Logo

Antec II - VGA Card Cooling; Air Filter Maintenance

Antec II
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VGA Card Cooling
There is an 80mm fan mount with vents on the clear side window right above the VGA card. The
vents can supply fresh air to the card without a fan (passive cooling), or with a fan (active cooling)
if you are using a high performance VGA card that needs extra cooling. Install the fan so that the
air is blowing into the case. We recommend using an Antec 80mm TriCool fan.
Maintaining the Washable Air Filter
From time to time it will be necessary to wash the installed air filter. Not washing the air filter will
result in higher system temperatures and possible stability problems. We recommend checking the
air filter at least once a month initially. The frequency will change depending on system usage
(users whose systems run 24/7 will likely have to check/wash more often than those who don't
use their systems every day) and on environmental conditions.
6

Related product manuals