To Next PageTo Next Page
Need help?Do you have a question about the Anton Paar Quantachrome ULTRAPYC UPY-32 and is the answer not in the manual?
General| Model | ULTRAPYC UPY-32 |
|---|---|
| Type | Gas Pycnometer |
| Measurement Principle | Gas displacement |
| Number of Samples | 1 |
| Precision | ±0.01% of reading |
| Gas Used | Helium or Nitrogen |
| Accuracy | ±0.02% of reading |
| Pressure Range | 0 to 20 psig (0 to 1.38 bar) |
| Temperature Control | Optional external circulator |
| Temperature Range | Ambient to 50°C (optional) |
| Power Requirements | 100-240 VAC, 50/60 Hz |
Explanation of warning symbols and essential safety guidelines for instrument operation.
Covers flow diagram, startup, environment, gas connections, and sample cell setup.
Detailed procedures for calibrating VA, VC, and reviewing calibration data.
Process for setting run/sample parameters, performing measurements, and accessing reports.
Details on sample preparation, calibration, and specific measurement cycles (e.g., compressibility).
Guidance on interpreting error codes and resolving instrument issues.
