Need help?Do you have a question about the Anton Paar MCR Evolution Series and is the answer not in the manual?
General| Type | Rheometer |
|---|---|
| Rheometer Type | Rotational Rheometer |
| Software | RheoCompass |
| Angular Frequency | 10^-7 to 628 rad/s |
| Frequency Range | 10^-7 Hz to 100 Hz |
| Interface | Ethernet |
General guidelines for the safe operation, installation, and handling of the MCR instrument.
Specific warnings and precautions for operating the MCR with various substances and conditions.
Identifies potential hazards such as sample decomposition, hot surfaces, and heavy objects.
Explains the meaning of DANGER, WARNING, CAUTION, and NOTICE safety message types.
Details the various connection points on the MCR for air, power, data, and accessories.
Describes the instrument's display, buttons, and the two available operating modes.
Lists the main instrument models included in the delivery and their specifications.
Details the contents of the small and large accessory kits for MCR instruments.
Introduces application-specific accessories available from Anton Paar for enhanced functionality.
Specifies environmental conditions, space, and precautions for setting up the MCR.
Instructions for installing the RheoCompass software from the provided USB storage device.
Guides on connecting the MCR to air supply, power, and a PC via USB or Ethernet.
Covers instrument leveling, mounting temperature devices, hoods, and measuring geometries.
Details connecting fluid circulators, hoods, FMUs, inert gas, and magnetic valves for system operation.
Steps to switch on the MCR and interpret the information shown on the instrument display.
Overview of the MCR's front panel buttons, softkeys, and their operations.
Guide to navigating the MCR menu to adjust various instrument settings.
Information on the MCR's maintenance countdown and service reminders.
Procedure for starting the MCR, initializing communication, and preparing for measurements.
Detailed methods for loading samples into various geometries (Concentric Cylinder, Plate-Plate, Cone-Plate, Double Gap).
Procedures for cleaning couplings and lists of materials in contact with samples or fluids.
Instructions for securing the MCR's measuring head and air bearing for storage.
Detailed guide on how to pack the MCR for safe transportation using supplied materials.
Details the requirements for periodic maintenance by authorized Anton Paar service engineers.
Procedure for contacting Anton Paar representatives for instrument repairs and return.
Covers environmental conditions, power, weight, size, air supply, coolant, and model-specific performance data.
Details pin configurations for Serial COM, Pt100, Thermo Couple, Analog Outputs, and AUX connectors.
Official EC declaration stating compliance with relevant EU directives and harmonized standards.
Official UK declaration stating compliance with relevant UK legislation and standards.
To Next Page