Need help?Do you have a question about the Anton Paar MCR 102e and is the answer not in the manual?
General| Type | Rheometer |
|---|---|
| Measurement Principle | Rotational |
| Normal Force Range | 0.005 N to 50 N |
| Speed Range | 3000 rpm |
| Frequency Range | 100 Hz |
| Interface | USB, Ethernet |
| Temperature Range | -40°C to 200°C (with optional accessories) |
General safety guidelines for instrument operation and handling.
Specific safety precautions for hazardous materials and operations.
Details potential risks associated with instrument operation and specific parts.
Specifies environmental, physical, and fluid requirements for instrument installation.
Guide for installing the RheoCompass software onto a PC.
Instructions for connecting the necessary compressed air supply.
Steps for connecting the instrument to the electrical power supply.
Details methods for connecting the MCR to a PC via USB or Ethernet.
Procedure for attaching and detaching measuring geometries.
Steps to power on the MCR and initiate the boot sequence.
Description of the buttons and controls on the MCR's operating panel.
Steps for starting up the MCR and initializing communication with software.
Details periodic maintenance by qualified service personnel and warranty implications.
To Next Page