Need help?Do you have a question about the Anton Paar DMA 35N and is the answer not in the manual?
General| Measurement Principle | Oscillating U-tube |
|---|---|
| Accuracy (Density) | ±0.001 g/cm³ |
| Resolution (Density) | 0.0001 g/cm³ |
| Sample Volume | 2 mL |
| Temperature Accuracy | ±0.1 °C |
| Interface | USB |
| Measuring Range (Density) | 0 to 3 g/cm³ |
| Wetted Materials | Glass, PTFE |
| Power Supply | Battery or USB |
| Display | LCD |
| Accuracy | ±0.001 g/cm³ |
| Resolution | 0.0001 g/cm³ |
| Temperature Resolution | 0.1 °C |
| Operating Conditions | 0 to 50 °C, 0 to 95% RH (non-condensing) |
| Storage Conditions | -20 to 60 °C, 0 to 95% RH (non-condensing) |
Details safety measures for using the device in hazardous environments.
Describes the front panel layout and components of the DMA 35N.
Details the components and features located on the rear of the DMA 35N.
Explains the functions of the operating keys on the DMA 35N device.
Illustrates and explains the elements shown on the DMA 35N display.
Instructions on how to properly connect the filling tube to the DMA 35N.
Step-by-step guide on how to power on the DMA 35N device.
Procedure for safely powering down the DMA 35N instrument.
Guide on how to select and activate different measurement units or custom functions.
Detailed explanation of various units and custom functions available on the DMA 35N.
Practical examples demonstrating how to configure custom functions on the DMA 35N.
Instructions for filling the measuring cell using the instrument's built-in pump.
Steps for filling the measuring cell using an external plastic syringe.
Methods for storing measurement results, including manual and automatic options.
Procedure for retrieving previously saved measurement data from the device.
Instructions on how to print saved measurement data to a printer or PC.
Steps for removing stored measurement results from the device's memory.
Guidelines for cleaning the DMA 35N's measuring cell to ensure accuracy.
Procedures for cleaning the instrument's built-in pump mechanism.
Instructions on how to safely replace the batteries in the DMA 35N.
Details the pinout and specifications for the interface plug.
Instructions on how to connect the DMA 35N to external devices.
To Next Page