Need help?Do you have a question about the Anton Paar ViscoQC 300 Series and is the answer not in the manual?
General| Power Supply | 100-240 V, 50/60 Hz |
|---|---|
| Measurement Principle | Rotational Viscometry |
| Repeatability | ±0.2 % |
| Spindle Types | L, R |
| Display | Color touchscreen |
| Interface | USB, Ethernet |
Covers general safety aspects, liability, installation, and use precautions for the instrument.
Provides specific safety guidelines for using the ViscoQC 300 with various substances and handling procedures.
Defines the purpose and scope of the ViscoQC 300, including its applications and model variations.
Outlines the necessary prerequisites and conditions for installing the ViscoQC 300.
Provides step-by-step instructions for the physical installation of the ViscoQC 300.
Explains the process of leveling the instrument and performing the zero adjustment for accurate measurements.
Describes the procedure for verifying instrument accuracy using certified reference substances.
Covers settings that influence measurement results, such as spindle corrections and temperature offsets.
Details how to adjust spindle correction factors to match certified reference values for improved accuracy.
Explains how to set a temperature offset for the Pt100 sensor to ensure accurate temperature readings.
Explains how to set up and customize measurement methods for different testing scenarios.
Details the seven available measurement modes, including Manual Mode, Speed Scan, and Stop at Time.
To Next Page