Need help?Do you have a question about the Anton Paar ViscoQC 300-R and is the answer not in the manual?
General| Measurement Principle | Rotational viscometer |
|---|---|
| Temperature Accuracy | ±0.1°C |
| Interface | USB, Ethernet |
| Power Supply | 100-240 V, 50/60 Hz |
| Display | 7-inch touchscreen |
| Viscosity Measurement | Dynamic Viscosity |
| Torque range | 30 mNm |
| Repeatability | 0.2 % |
| Temperature Range | -100°C to 300°C (with appropriate accessories) |
| Accuracy | ±1.0% of full-scale range |
General safety guidelines and liability information for the ViscoQC 300.
Specific safety precautions for handling the ViscoQC 300 and its accessories.
Defines the purpose and application scope of the ViscoQC 300 rotational viscometer.
Procedure for leveling the instrument and performing zero adjustment.
Details on user accounts, login procedures, and password management.
Procedure for verifying instrument accuracy using a certified reference substance.
Settings that can be adjusted to influence measurement results.
How to adjust spindle correction factors (SCF) for improved measurement accuracy.
Procedure for setting a temperature offset for the Pt100 sensor.
Information on selecting and using spindles and measuring systems.
Steps for preparing samples and filling the test vessel.
Procedure for preparing the instrument and sample for spindle measurements.
Procedure for preparing the instrument and sample for DIN system measurements.
Step-by-step guide for initiating and conducting a measurement.
Procedure and required equipment for standard cleaning of instrument parts.
Accessing software maintenance functions like TruSine and updates.
Procedure for checking the instrument's bearing condition.
Instructions and precautions for updating the instrument's software.
To Next Page