To Next PageTo Next Page
Need help?Do you have a question about the Anton Paar DMA 35 and is the answer not in the manual?
General| Density range | 0 g/cm³ to 3 g/cm³ |
|---|---|
| Accuracy | ±0.001 g/cm³ |
| Sample volume | 2 mL |
| Repeatability Density | ±0.0005 g/cm³ |
| Resolution Density | 0.0001 g/cm³ |
| Measurement Principle | Oscillating U-tube |
| Temperature accuracy | ±0.2 °C |
| Display | LCD |
| Interface | Bluetooth, USB |
| Repeatability Temperature | ±0.1 °C |
| Resolution Temperature | 0.1 °C |
| Wetted materials | PTFE, borosilicate glass |
| Dimensions | 140 x 138 x 27 mm |
| Measurement Time | Approx. 30 seconds |
| Data memory | 1000 data sets |
Outlines instrument liability and provides general guidelines for safe installation and operation.
Details requirements for use in hazardous areas and precautions for flammable substances.
Defines density and explains the oscillating U-tube method used by the DMA 35.
Instructions for connecting the filling tube, syringe adapter, and powering the instrument on/off.
Configuration options for language, measurement units, and audible feedback settings.
Settings for managing power consumption and display backlight for optimal usability.
Adjusting display contrast and assigning functions to the instrument's softkeys.
Procedures for setting up and managing password protection for instrument security.
How to set the instrument's date, time, and choose the preferred date format.
General safety advice and preparation steps before conducting a measurement.
How to choose and set the desired unit for displaying measurement results.
Steps for performing a measurement, deleting, printing, and emptying the measuring cell.
Step-by-step guide for replacing the instrument's batteries, including safety warnings.
Instructions on how to update the instrument's firmware using a PC.
