Need help?Do you have a question about the AnyCubic i3 MEGA and is the answer not in the manual?
General| Build Volume | 210 x 210 x 205 mm |
|---|---|
| Layer Resolution | 0.05-0.3 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | SD card, USB |
| Supported Materials | PLA, ABS, HIPS, Wood, TPU |
| Extruder Quantity | 1 |
| Print Technology | FDM (Fused Deposition Modeling) |
| Nozzle Temperature | Up to 260°C |
| Slicer Software | Cura, Simplify3D, Repetier-Host |
| Extruder Type | Bowden |
| Machine Dimensions | 405 x 410 x 453 mm |
| Printing Speed | 20 - 100 mm/s |
| Travel Speed | 150 mm/s |
| Heated Bed Temperature | Up to 100°C |
| Input Formats | STL, OBJ, DAE, AMF |
| Frame | Metal |
To Next Page
