Need help?Do you have a question about the AnyCubic i3 MEGA and is the answer not in the manual?
General| Build Volume | 210 x 210 x 205 mm |
|---|---|
| Layer Resolution | 0.05-0.3 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | SD card, USB |
| Supported Materials | PLA, ABS, HIPS, Wood, TPU |
| Extruder Quantity | 1 |
| Print Technology | FDM (Fused Deposition Modeling) |
| Nozzle Temperature | Up to 260°C |
| Slicer Software | Cura, Simplify3D, Repetier-Host |
| Extruder Type | Bowden |
| Machine Dimensions | 405 x 410 x 453 mm |
| Printing Speed | 20 - 100 mm/s |
| Travel Speed | 150 mm/s |
| Heated Bed Temperature | Up to 100°C |
| Input Formats | STL, OBJ, DAE, AMF |
| Frame | Metal |
Key safety guidelines for operating the ANYCUBIC 3D printer, covering temperature, moving parts, and environment.
Step-by-step guide for performing assisted platform leveling using the proximity sensor.
Detailed instructions for manual platform leveling using paper and adjustments.
Specific adjustments for manual leveling when using a glass print platform.
Instructions for selecting a file from the SD card and initiating the printing process.
Steps to preheat the printer and load filament into the hotend.
Troubleshooting motor shaking, abnormal sounds, and cable connections.
Resolving issues with file printing, SD card readability, and touch screen freezes.
Addressing no extrusion, motor knocking, filament leaking, and nozzle clogging.
Solutions for prints not sticking to the bed, warping, curling, and layer shifting.
Troubleshooting freezing screens, TO sensor errors, and abnormal print head movement.
Resolving problems with prints stopping halfway or Gcode file corruption.
To Next Page
