AnyCubic i3 MEGA - Platform Leveling; Assisted Leveling Procedure

9
4. Leveling
It is essential to have the platform leveled for 3D printing. ANYCUBIC i3 MEGA offers two
methods for platform leveling: assisted leveling and manual leveling. For experienced
users, it is recommended to just level the platform manually. For new customers, you may
use the assisted leveling.
ANYCUBIC i3 MEGA equipped with proximity switch (sensor) for the assisted leveling
function. Please note that this sensor is only function with metal platform (such as
aluminum) and the results might be inconsistent when the platform is hot.
4.1 Assisted Leveling
1. Ensure the wiring is OK. Then connect the power cord to the machine and the power
outlet respectively. Switch on the machine.
(Figure 9) Load the filament manually
Press
Press