Check IP Address
① Go to [Start > Run]. Type ‘winipcfg’ command,
and click ‘OK’
9If there is abnormal values, click ‘Release All’ and ‘Renew All’
② Select your LAN card, not PPP adapter. Make sure the IP
Address, Subnet Mask, and Default Gateway.
- IP Address : 192.168.10.100 ~ 192.168.10.200 [OK]
- Subnet Mask : 255.255.255.0 [OK]
- Default Gateway : 192.168.10.1 [OK]
11
To Next Page
Loading...