5) Generate WEP Key and click OK button for saving configurations.
In case of selecting TKIP or AES
1) Enter WPA Shared Key that you want, which is for communicating between the Router and Wireless Client
PC.
2) Enter RADIUS Server Address and Port number.
3) Enter Shared Secret that the RADIUS Server requests, which is for communicating between the Router and
the RADIUS Server.
4) Click OK button for saving configurations.
RADIUS
1) Select WEP Encryption Algorithm.
2) Select WEP type – Static WEP or Dynamic WEP
3) Select WEP Encryption Bits – 64-bit WEP or 128-bit WEP.
4) Enter RADIUS Server Address and Port number.
5) Enter Shared Secret that the RADIUS Server requests, which is for communicating between the Router and
the RADIUS Server.
6) Generate WEP Key and click OK button for saving configurations.
30
To Next Page
Loading...