To Next PageTo Next PageHow to fix an AnyTone Two-Way Radio that won't turn on?
If your AnyTone Two-Way Radio won't turn on or the display remains blank after switching it on: * Ensure the battery pack is correctly installed by removing it and reinstalling it. * Check the battery level; it may be insufficient. Recharge or replace the battery pack.
What to do if my AnyTone Transceiver won't turn on?
If your AnyTone Transceiver won't turn on or the display remains blank after switching it on, try removing the battery pack and reinstalling it. If that doesn't work, recharge or replace the battery pack.
What to do if I cannot hear other members on my AnyTone Two-Way Radio?
To communicate effectively with your group using the AnyTone Two-Way Radio, ensure the following: 1. Verify that the frequency and CTCSS settings match those of other group members. 2. Confirm that you are within an appropriate communication range. 3. Ensure that the radio is set to the correct digital mode and frequency. 4. In digital mode, verify that the correct code and encryption group are being used for the current channel. 5. In digital mode, confirm that the correct receiving contacts and receiving group are selected.
Why am I hearing other people on my AnyTone Two-Way Radio channel?
If you're hearing voices from individuals outside your group on your AnyTone Two-Way Radio, especially in analog mode, try changing the CTCSS/DCS tone. Make sure to update this setting on all radios within your group to maintain consistent communication.
What to do if I cannot hear other members on my AnyTone Transceiver?
If you can't communicate with other members using your AnyTone Transceiver, ensure the frequency and CTCSS/DCS settings match those of the other members. Also, verify that you are within the communication range and using the correct digital mode and frequency. In digital mode, confirm that the correct code and encrypt group are being used in the current channel, and that the correct receiving contacts and receiving group are selected.
Why does my AnyTone Transceiver battery not last long after charging?
If your AnyTone Transceiver battery drains quickly after charging, the battery might be defective. Replace it with a new battery pack.
How to block other voices on my AnyTone Transceiver?
If you hear voices from individuals outside your group on your AnyTone Transceiver channel, change the CTCSS/DCS tone. Ensure that all radios within your group also update to the new tone.
General| Brand | AnyTone |
|---|---|
| Model | AT-D868UV |
| Category | Two-Way Radio |
| Language | English |
