To Next Page

To Previous Page

LED status indicator

Power on - white.

Standby - white flashes and goes out after about 3 minutes.

Charging - orange.

Charge your phone/tablet

When 16T2 is switched on, the phone/tablet is connected and the signal indicator shows an orange light.Press the

battery power button for 3~5 seconds, the power light appears white and starts charging (you can observe whether

the phone has been charged from the mobile phone, then the screen of power mode switch will be reconnected,

and the flash is normal).

When 16T2 is turned off, connect to the phone/tablet and the power light will appear orange. Press the battery

power button for 3 to 5 seconds and the power light will appear white and start charging (you can observe whether

the phone is charged or not from the phone).

WARNING: 16T2 default is the state of being charged, reverse to the mobile phone charging will have compatibility

problems not fully support all mobile phones.

Questions and Answers:

Need help?

Do you have a question about the AOC 16T2 and is the answer not in the manual?

AOC 16T2 Specifications

General