To Next Page

To Previous Page

Wall Mounting

Preparing to Install An Optional Wall Mounting Arm.

This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this

procedure. Follow these steps:

1 Attach the VESA_bracket lock to the back of monitor with 4 screws.

2 Follow the manufacturer's instructions to assemble the wall mounting arm.

3 Place the wall mounting arm onto the VESA_bracket. Line up the holes of the arm with the holes in the

VESA_bracket.

4 Insert the 4 screws into the holes and tighten.

5 Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for

instructions on attaching it to the wall.

NOTE: VESA mounting screw holes are not available for all models, please check with the dealer or official

department of AOC.

Questions and Answers:

Need help?

Do you have a question about the AOC 16T2 and is the answer not in the manual?

AOC 16T2 Specifications

General