EasyManuals Logo
Home>AOC>Monitor>16T2

AOC 16T2 User Manual

AOC 16T2
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
Type C function working status for charge:
Charging status: (Type C 1=TC1, Type C 2=TC2)
TC1 and TC2 support PD adaptor CC profile 5V/3A input.
When TC 1 and TC 2 both are insert adaptor that will select one port to charge who is first insert.
TC 1(TC 2) insert adaptor and TC 2 (TC 1) connection to mobile phone or tablet, the status will be monitor and
mobile phone or tablet both are charged.
When (TC1 or TC2) insert adaptor and another side (TC1 or TC2) connector mobile phone or tablet that will output
5V/500mA (maximum) to charging mobile phone or tablet.
Ps. 1.support Notebook to monitor charging, not support monitor to Notebook charging.
2.Charge phone or tablet need push battery voltage display key 3~5 second switch on charge function.
TC1/TC2
Adaptor
Phone/Tablet
NB
NA
Adaptor
Plug & Play System
charging
TC1 Signal and System
charging
TC2 System charging
TC1 Signal/System
charging
TC2 System charging
TC2 System
charging
Phone/Tablet
TC1 System charging
TC2 Signal/Charging
TC1/TC2 Signal and System
charging
TC1 Signal/System
charging
TC2 Signal and System
charging
TC2 Signal and
System charging
NB
TC1 System charging
TC2 Signal/System
Charging
TC1 Signal and System
charging
TC2 Signal/System charging
TC1 Signal/System
charging
TC2 Signal/System
charging
TC2 Signal and
System charging
NA
TC1 System charging
TC1 Signal and System
charging
TC1 Signal/System
charging
NA
Power bank mode:
When push long time (3~5 second) and connection the phone/tablet
TC1 and TC2 output 5V/500mA(maximum)
WARNING: 16T2 default is the state of being charged, reverse to the mobile phone charging will have compatibility
problems not fully support all mobile phones.
Suggest to charge the mobile phone in DC ON state.
Push battery voltage display once will show battery status on LED.
Battery capacity 0%~5% show RED color.
Battery capacity 5%~50% show ORANGE color.
Battery capacity 50%~75% show YELLOW color.
Battery capacity 75%~100% show GREEN color.
Power bank mode only support Type C USB C PD device.
NOTE: 16T2 needs to be charged for 8 hours when first time use. Normally charging with accessory adaptor for 5 to 6 hours
can reach its full capacity.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AOC 16T2 and is the answer not in the manual?

AOC 16T2 Specifications

General IconGeneral
Colorblack
Screen Typelcd
Tiltableyes
Wall Mount75mm x 75mm
Touch Screenyes
Webcamno
OS Compatibilitywindows
Screen Size16 inches
Panel Typeips
Aspect Ratio16:9
Resolution1920 x 1080
Native Resolution1920 x 1080
Refresh Rate60hz
Horizontal Viewing Angle170 degrees
Vertical Viewing Angle170 degrees
Response Time4 milliseconds
Brightness250 candela per square meter
Contrast Ratio700:1
Synchronizationnot applicable
HDRno
Built-In Speakersyes
HDMI Ports0
Headphones Outputyes
Power Saving Mode0.5 watts
Power Consumption2 watts
Height with Stand9.04 inches
Width with Stand14.3 inches
Net Weight without Stand2.2 pounds

Related product manuals