33
O Timer 0-24hrs Select DC o time
Image Ratio
Wide / 4:3 /1:1 /17”(4:3) /
19”(4:3) / 19”(5:4) /
19”W(16:10) / 21.5”W(16:9) /
22”W(16:10) / 23”W(16:9) /
23.6”W(16:9) /24”W(16:9) /
27”W (16:9) /30”W (21:9) /
32”W (16:9) /34”W (21:9) /
40” W(16:9) /42” W(16:9)
Select image ratio for display.
DDC/CI Yes or No Turn On/O DDC/CI Support
Reset Yes or No Reset the menu to default
Working Time
It refers to the total time that the screen lights up,
in unit of hour.
Time after O-RS
( Time after elim-
ination of image
retention)
It refers to the time that the screen lights up after
the last Off RS operation is executed, in units
of hours. A prompt of executing Off RS will be
automatically sent to the user every four hours.
O-RS Counts
( Number of times
of eliminating im-
age retention)
It is used to record the number of times of exe-
cuting O-RS.
JB Counts
(Number of times
of screen com-
pensation and
correction)
It is used to record the number of times of exe-
cuting JB.
Note:
[1]: The device needs to support USB C (DP Alt) function.
The USB C (DP Alt) function is turned o by default when it is used for the rst time or after the OSD menu reset
operation, and it can be turned on again in any of the following ways:
1) The display is turned on and o 2 times in total.
2) The “USB” option under “Others” in the OSD menu is set to non-closed state.
To Next Page
Loading...
Need help?
General