To Next Page

To Previous Page

9. White- Balance, Luminance Adjustment

Approximately 30 minutes should be allowed for warm up before proceeding white balance adjustment.

How to setting MEM channel you can reference to chroma 7120 user guide or simpl use “SC” key and “NEXT” Key

to modify xyY value and use “ID” key to modify the TEXT description Following is the procedure to do white-balance

adjust .

2. Setting the color temp. you want

A. MEM.CHANNEL 3 Warm (6500K):

Warm color temp. parameter is x = 313 ±30, y = 329 ±30

B. MEM.CHANNEL 4 Normal (7300K):

Normal color temp. parameter is x = 301 ±30, y = 317 ±30

C. MEM.CHANNEL 9 Cool (9300K):

Cool color temp. parameter is x = 283 ±30, y = 297 ±30

D. MEM.CHANNEL 10 (sRGB color):

sRGB color temp. parameter is x = 313 ±30, y = 329 ±30

3. Enter into the factory mode

A. USE the tool ,，double-click the icon and

choose”Enter Factory” You will enter into the factory mode

B. Press the MENU button,Pull out the power cord, then plug the power cord. Then the factory OSD will be at

the left top of the panel.

4. Gain adjustment:

Move cursor to “-F-” and press MENU key

AOC e2262Vwh Service Manual

Other manuals for AOC e2262Vwh