- 12 -
Auto Detect: When “Auto Detect” is turned on, every pigment will be detected and self-adjusted to render a lively
picture.
Demo: Screen divided into two for demonstration purposes.
2) How to use Picture Boost?
Users can change the color settings of a self-selected zone on the screen. The size and position of the selected zone can
also be adjusted. "Picture Boost" is located in the fifth icon labeled "Picture Boost" in the OSD menu. Turn on "Bright
Frame" to select a zone on the screen to be enhanced. Please note when adjust or turn on any one of the DCB features,
the rest of color settings including DCR will be disabled or return to default.
Disclaimer: DCB aftereffects are subject to the resolution and quality of the display content, hence may look different than
the above illustrations.
To Next Page
Loading...
Need help?
General
