8
Quick Installation
Installing the Stand Base
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Install the stand base to the monitor.
Disconnecting the Stand Base
1. Place the monitor face down on a soft cloth or cushion on a table.
2. Press the 2 tenons inwardly.
3. Pull the stand base to remove.
4. Press on four corners of the hinge cover and pull as arrow direction to disengage the hinge
cover.
5. Remove the 4 screws on the hinge, then pull up the stand slowly.
To Next Page
Loading...
Need help?
General
