35
CHANNEL Menu
—To set up for TV
Note: The Channel Menu is only active in TV source. When in AV, S-Video, YPbPr, HDMI1, HDMI2,
HDMI3 , PC and USB source, the CHANNEL Menu will not appear.
Note: The condition of DTV Signal will only be displayed when source is in DTV.
TV Source: To select Cable or Air as the TV source.
Auto Scan: To auto scan the TV or DTV channels. Select Air or Cable in TV Source option,
and press ► to start auto scanning TV channels. Press MENU again at any time to interrupt
scanning.
To Next Page
Loading...
