31
LOCK Menu
—To set up parental control
It is active in all input sources:
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1,
HDMI2, HDMI3, PC and USB sources.
Enter Password: Enter password and the screen below will show. (The default password is
0000.)
Note: Some options will be disabled when in YPbPr,
HDMI1, HDMI2, HDMI3, PC and USB
source.
Change Password: To change the password, press ►, and the screen on the right appears.
Follow the instructions to change password.
System Lock: Select “On” to enable the following options.
Note: The below options can be enabled only when “On” is selected here.
Unrated Lock: Select “On” to block unrated movies or TV programs. (Only active in TV, AV,
S-Video sources)
Input Block: To set the input source to be blocked.
To Next Page
Loading...
Need help?
General
