30
Restore Default: To restore the factory default settings.
Input Label: To change the input source name.
DCR: To turn on/off the DCR (Dynamic Contrast Ratio 100,000:1) function.
(Except USB source.)
Over Scan: To select this function to On or Off in HDMI1, HDMI2 and HDMI3.(Only available
when input signal is in video timing. Ex:480i, 480p, 720p,1080i, 1080p)
Media: To set the picture slide show setting.(Only available in USB source.(See page 39))
To Next Page
Loading...
