20
BASIC OPERATION
To operate your LCD TV, you may use the TV remote control or side panel buttons to select input
source, change channels, or adjust volume.
Turning on the LCD TV
Before using the LCD TV:
1. Connect external equipment properly.
2. Insert the power plug and the power LED indicator will light orange.
Power On/Off
To turn the LCD TV on/off:
Press POWER button on the right side of LCD TV or press POWER button on your remote control
to turn on/off the TV. The power LED indicator lights blue when the LCD TV is on, and lights
orange when TV is off.
Note: When there is no signal in the PC mode, the power LED indicator lights orange after a few seconds’
idleness.
Initial Setup
When the TV is initially powered on, basic settings proceed automatically and subsequently:
(Setup Wizard only appears when first turning the TV on and without channel scanning.)
2. Press ◄ or ► to select OSD language,
then press ENTER, ◄ or ► to confirm the
selection, and press ENTER once more to
go to next step. To change the selection,
press ▲ or ▼. To return to the previous
page, press MENU.
3. Select Time Zone of your location. To press
▼ to setup DST (Daylight Saving Time) and
select On or Off with ◄ or ►, according to
the time zone of your area. To press ▼ to
setup Time Format, and select 12-hour or
24-hour with ◄ or ►, then press ENTER to
continue.
1. Press the POWER button on the remote
control. The Setup Wizard window will be
display.
To Next Page
Loading...
Need help?
General
