16
Switching Input Source
On AOC TV, you can cpress “Source” to choose the signal source on the display menu.
1 Press Source to call out source menu.
2
!0! 0
}}
0!
0!
0!
3
!0! 0
}}
Press OK to enter.
Input List
TV
YPbPr
AV
SCART
PC
HDMI 1
HDMI 2
USB
!0!0
}}
0!
0!
0!
Adjust Picture Setting
1 Press MENU to call out MENU.
2
!0! 0
}}
0!
0!
0!
” , and press OK.
3
!0! 0
}}
0!
0!
0!
, Sharpness, Color, Tint, Color temp, Noise
reduction, Adaptive Contrast, DCR, Backlight, Aspect Ratio, Preset, and press OK to enter.
4
!0! 0
}}
0!
0!
0!
5
Press MENU again to exit.
Picture Setting Items Description
Picture Mode
Vivid For Enhances picture contrast and sharpness.
Standard For standard picture settings. Recommended for home entertainment.
Eco Decrease backlight level to save the power consumption.
Movie
For viewing film-based content. Most suitable for viewing in a theater-like
environment.
Preset for all inputs can also be accessed by pressing Picture on the remote control to directly toggle the
modes.
Brightness Brightens or darkens the picture.
Contrast Increases or decreases picture contrast.
Colour Increases or decreases colour saturation.
Sharpness Sharpens or softens the picture.
Colour temp.
Cool Gives the white colors a bluish tint.
Warm Gives the white colors a reddish tint.
Standard Gives the white color a nature tint.
Advanced Control
Noise
Reduction
Gives four NR effect degrees, such as: Low, Mid, High and Off. The default setting is Mid.
DCR Dynamic Contrast Ratio (DCR) auto adjusts the backlight of the screen.
Backlight Backlight strength adjustment, the tuning range is 0 ~ 30.
To Next Page
Loading...
Need help?
General
