17
Adjust Sound Setting
1 Press MENUto call out MENU.
2
!0! 0
}}
0!
0!
0!
” , and press OK.
3
!0! 0
}}
0!
0!
0!
˖Sound mode, Bass, Treble, Balance, Audio Source, Audio language, SPDIF,
Speaker, AVL, Preset, and press OK to enter.
4
!0! 0
}}
0!
0!
0!
5
Press MENU again to exit.
Audio Setting Items Description
Sound Mode
Music: Enhances treble and bass.
Speech: Enhances treble and keep bass in middle.
Personal: Adjust sound mode as personal favorite.
Sound Mode can also be accessed by pressing Audio on the remote control.
Bass Increases or decreases lower-pitched sounds.
Treble Increases or decreases higher-pitched sounds.
Balance Emphasizes left or right speaker balance.
Audio Source Select the audio source from Mono, Stereo, or Dual 1 & Dual 2. (This function works in ATV only.)
SPDIF
Digital audio output format. Select from RAW and PCM. The difference between SPDIF PCM or RAW:
SPDIF PCM: It will only output as a PCM 44.1Khz digital no matter what the recording is in the media.
SPDIF RAW: It will output the stream as it is digitally recorded, i.e. DTS recording as a DTS or a Dolby as a Dolby, or a
native 48 or 96Khz.
Speaker
Choose to turn on / off the TV internal speaker. The digital audio output signals and earphone output signals will not be
turned off even though the TV speaker is off. The default setting is On.
AVL Enable or disable Automatic Volume Level.
Preset Restore the default audio settings.
To Next Page
Loading...
Need help?
General
