19
Features Setup
1 Press MENU/EXIT to call out MENU.
2
!0! 0
}}
0!
0!
0!
” , and press OK.
3
!0! 0
}}
0!
0!
0!
, Time, Sleep timer, Transparency, Password Setting,
Parental control, Closed Captions, Analog Caption, etc. and press OK to enter.
4
!0! 0
}}
0!
0!
0!
5
Press MENU/EXIT again to exit.
Menu Description
Menu Language To select the on-screen display menu language.
Picture Format To select the available display format from Auto, Normal, Wide, Zoom 1, or Zoom2.
Time
Time Zone
To select the time zone you are in.
Time
To set the time and date or select auto synchronization.
Tip: Before you want to set the time and date by your own, please make sure
Auto synchronization is Off.
Sleep Timer
To set the TV to turn itself off within a certain time.
Subtitle
Analog Subtitle
To display the transmitted subtitle on the screen. Either this text can be permanently displayed (assuming that the
service is available in the broadcast) or only when mute is active.
Subtitle Type
To choose the subtitle type from normal or hearing impaired.
Teletext Language
Digital Teletext Language
To select the teletext language.
Decode Page Language
To set the teletext language to the regional location.
Common Interface This menu appears with your CI supplier information.
HDMI Scan Info
(HDMI only)
Automatic
Set to underscan or overscan automatically when the video signal is detected.
Underscan
When the video signal is detected, all active pixels and lines are displayed with or without border.
Overscan
When the video signal is detected, some active pixels and lines at the edges are not displayed.
Reset Default To reset all TV settings to the original factory values.
To Next Page
Loading...
Need help?
General
