11
Webcam with Windows Hello
The webcam is equipped with advanced sensors for Windows Hello facial recognition, which conveniently logs you into
your Windows devices in less than 2 seconds, 3 times faster than a password.
Monitor with Windows Hello webcam can be enabled by simply connecting your USB Cable from your PC to the
“USB-C” port of this monitor. Now, the webcam with Windows Hello is ready to work as long as the Windows Hello
setting in Windows10/11 is complete. Refer to Windows ofcial website for the settings: https://support.microsoft.com/
help/4028017/windows-learn-about-windows-hello-and-set-it-up.
Please note that Windows 10/11 system is required for setting up Windows Hello: facial recognition; with an edition lower
than Windows 10/11 or Mac OS, the webcam can work without the function of facial recognition. With Windows 7 the
driver is required to activate this webcam.
1 2 3
-90°
90°
Noted: Turn the lens down 90° to block the lens. The microphone can be turned off using the video software or the MIC
OFF shortcut key.
21 13 4
1 2 3
-90°
90°
1 Microphone
2 Webcam activity light
3 5.0 Megapixel Webcam
4 IR of Face identication
WARNING:
1. Do not use the camera as a handle, it will cause damage.
2. The rotation Angle of the camera is ±90°, if exceed ±90°, it will cause damage.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
