15
OSD Setting
Basic and simple instruction on the control keys.
Luminance Color Setup Picture Boost OSD Setup Game Setting ExitExtra
Contrast 50
Brightness 70
Eco mode Standard
Gamma Gamma 1
DCR Off
HDR Mode Off
1). Press the
MENU-button
to activate the OSD window.
2). Press
Left
or
Right
to navigate through the functions. Once the desired function is highlighted, press the
MENU-button
to activate it, press
Left
or
Right
to navigate through the sub-menu functions. Once the desired
function is highlighted, press
MENU-button
to activate it.
3). Press
Left
or to change the settings of the selected function. Press to exit. If you want to adjust any other
function, repeat steps 2-3.
4). OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and then press
power button to turn the monitor on. To un-lock the OSD - press and hold the MENU-button while the monitor is
off and then press power button to turn the monitor on.
Notes:
1). If the product has only one signal input, the item of “Input Select” is disable to adjust.
2). If the screen size of the product is 4:3 or the input signal resolution is the native resolution, then the item “Image
Ratio” is invalid.
3). DCR and Picture Boost, for these states that only one state can exist
To Next Page
Loading...
Need help?
General
