OSD Setup
1. Press MENU-button to display menu.
2. Press Left or Right to select
(OSD Setup), and press MENU-button to enter.
3. Press Left or Right to select submenu, and press MENU-button to enter.
4. Press Left or Right to adjust.
5. Press AUTO-button to exit
.
Language Select the OSD language
Timeout 5-120 Adjust the OSD Timeout
DP Capability
1.1/1.2
please be noted that only DP1.2 support free sync
function
H. Position 0-100 Adjust the horizontal position of OSD
V. Position 0-100 Adjust the vertical position of OSD
Transparence 0-100 Adjust the transparence of OSD
Break Reminder
on or off
Break reminder if the user continuously work for more
than 1hrs
Notes:
If the DP video content supports DP1.2, please select DP1.2 for DP Capability; otherwise, please select DP1.1
To Next Page
Loading...
