6
2.2 To Use the Menus
1. Press the Menu button to display Main Menu.
2. Use the V- or V+ to select the function to be adjusted.
3. Use the P- or P+ to enter into the submenu, or to enable or adjust the selected function.
4. Press the Menu button to exit the Main Menu.
Source Menu
Press the Source button to enter the Source Menu: PC, HDMI, AV, S-Video, Component, TV.
Picture Setting
Brightness Adjustable between 0-100, set the backlight brightness of the picture.
Contrast Adjustable between 0-100, set the contrast of the picture.
Saturation Adjustable between 0-100, adjust the color concentration of the picture. (unavailable for PC and
Component Signal modes)
Sharpness Adjustable between 0-100, set the sharpness of thepicture.
Color Temp. Provides three options – Cold, Normal and Warm.
DNR (unavailable for PC mode)
Picture Mode Provides four options – Mild, Standard, Vivid and User.
DCR Turn on/off dynamic contrast mode
Reset Restore the picture settings to the default mode.
To Next Page
Loading...
