8
MENU language Select the OSD language between English/Simplified Chinese
/Russina/Portuguese/French/Spanish.
Image Ratio 4:3
16:9
Movie (unavailable for PC mode)
Panorama (unavailable for PC mode)
Sleep Timer Set the time for the TV set to enter the standby state (unavailable for PC mode)
OSD Position Change the display position of the OSD menu.There are a total of 9 positions.
OSD Transp. Adjustable between 0-10, set the transparency of the OSD menu.
Timeout Adjustable between 5-60, set the display time (in seconds) of the OSD menu.
Power Saver Turn on/off the power saving mode
Power On Recall Turn on/off the power on recall function
Reset Restore the function settings to the default mode.
Tuning (the following menus appear only in TV mode)
Channel Nr. Display the number of the current TV channel.
Frequency Display the frequency of the current TV channel.
Color System Display the color system of the current TV signal. (displayed as Auto after automatic saving)
Sound System Display the sound system of the current TV signal. (displayed as Auto after automatic saving)
Update Search
Auto Search It is used for the user to search the channel automatically and save the TV program. Pressing the
“Menu’ key will exit the Auto Search mode.
Manual Fine Tune Press and hold the Left or Right key for more than 3 seconds to enter the Manual Search mode;
in case of program with signal, exit the Semi-Auto Search and save the current program in the current program
number.
Channel Skip It can be set as On and Off. When it is set as On, press the Channel Skip on the remote controller
or on the panel.
To Next Page
Loading...
Need help?
General
