8
Adjusting the OSD settings
Note: The following content is for general reference only. Actual produc ations may
vary.
The OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open
the OSD. You can use the OSD to adjust the picture quality, OSD setting and general settings. For
advanced settings, please refer to following page:
Adjusting the Brightness setting
1. Press the MENU key to bring up the OSD.
2. Using the + - / keys, select from the OSD. Then navigate to the feature you wish to adjust.
3. Press the MENU key to c
rm your select.
4. Use the + - / keys to adjust the sliding scales.
5. The BIGHTNESS menu can be used to adjust the Brightness, Contrast, Preset mode, Active contrast,
Low blue mode and Response time.
To Next Page
Loading...
Need help?
General
