AOR AR-Mini User Manual (English)

Other manuals for AOR AR-Mini

Questions and Answers:

K
Kevin MooreAug 20, 2025
What to do if my AOR Receiver has no power?
- J
  jmurphyAug 20, 2025
  If your AOR Receiver isn't powering on, there are several possible causes: * The battery may be completely drained, in which case you should replace it with a new one. * The battery might need charging, so ensure it is properly charged. * The battery polarity might be incorrect; make sure you've inserted the battery with the correct orientation. * You might not be pressing the power (PWR) key long enough. Press and hold the PWR key for at least 2 seconds.
S
Sarah BowmanAug 22, 2025
Why is there no audio coming from my AOR Receiver?
- R
  Richard RodriguezAug 22, 2025
  If you're experiencing no audio from your AOR Receiver, here are a few things to check: * Ensure the volume isn't set too low; increase it to a comfortable level. * Make sure you've correctly tuned to the desired frequency. * Verify that the reception mode is properly configured. * The squelch value might be set too high. Set the squelch to “Threshold.” * The tone squelch frequency could be incorrect. Set the tone squelch correctly. * The DCS code might be wrong. Set the code correctly.
A
Alyssa HannaAug 25, 2025
How to fix no reception on AOR AR-Mini Receiver?
- K
  Kelly AguirreAug 25, 2025
  If your AOR Receiver isn't picking up any signals, consider the following: * Ensure the antenna is correctly and securely attached. * Verify that you have tuned to the correct frequency. * Confirm that you've selected the appropriate antenna type using setting number 17 or 18. * Check if the attenuator function is enabled and, if so, disable it.
D
Dustin WilliamsonAug 27, 2025
What to do if the audio is distorted on my AOR AR-Mini?
- J
  Janet GarciaAug 27, 2025
  If the audio from your AOR Receiver sounds distorted, it might be due to: * An incorrectly tuned frequency. Make sure you correctly tune the frequency. * An incorrect reception mode. Adjust the reception mode to the appropriate setting.
S
Sandra CobbAug 28, 2025
Why is my AOR Receiver emitting noise?
- J
  Julia BarkerAug 28, 2025
  If your AOR Receiver is emitting noise, the squelch value might be set too low. Set the squelch to “Threshold.”
L
lloydbrittanyAug 30, 2025
What to do if the search is not started on AOR Receiver?
- R
  Richard FlowersAug 30, 2025
  If the search function on your AOR Receiver isn't starting, it might be because the squelch value is set too small. Set the squelch to “Threshold.”
S
Sharon PerezSep 1, 2025
What to do if the scan is not started on AOR AR-Mini Receiver?
- L
  Luke BoyleSep 1, 2025
  If the scan function on your AOR Receiver isn't starting, it might be because the squelch value is set too small. Set the squelch to “Threshold.”
S
Sandra EllisonSep 3, 2025
Why is my AOR Receiver skipping a specific frequency?
- M
  Mary LiuSep 3, 2025
  If your AOR Receiver is skipping a specific frequency during a search, it's possible that the search skip function is enabled. Cancel the search skip to include that frequency in your scans.
D
Deborah CampbellSep 5, 2025
How to unlock keys on AOR AR-Mini Receiver?
- D
  Douglas BlackburnSep 5, 2025
  If the keys on your AOR Receiver are not responding, the key lock function may be activated. To restore key functionality, cancel the key lock function.
R
Raymond EdwardsSep 7, 2025
Why is there no audio from my AOR Receiver?
- J
  Jose DuncanSep 7, 2025
  If you're not getting any audio from your AOR Receiver, here are a few things to check: First, make sure the volume isn't set too low; increase it. Verify that you've tuned to the correct frequency. Ensure the reception mode is correctly set. Also, the squelch value might be set too high; adjust it to “Threshold.” Finally, check that the tone squelch frequency and DCS code are correctly set.