Apache Labs ANAN-G2 - 3.4 Getting Started with piHPSDR

To Next Page

To Previous Page

ANAN-G2 Manual Page 15 of 35

3.4 Getting Started with piHPSDR

piHPSDR will automatically launch on startup on the G2 with Display. If you have a radio without a

front panel display, you can still run it but you will need an attached monitor, mouse and keyboard.

Double click the piHPSDR icon

. The program will find the available radio hardware and display a

selection form. Click “Start” on the tab showing a connection via XDMA:

If you have a front panel controller, it is configured using the drop-down box marked “no controller”

here. Select G2 Front Panel

When you click Start, piHPSDR begins execution!

If you don’t have that icon, see section 7.5.2