ANAN-G2 Manual Page 9 of 35
To power the radio off: press and release the power button. The LED will change to WHITE when the
computer has shut down. Wait for approximately 10-15 seconds and then press and hold the button
for around 3 seconds until power turns off completely; the LED will extinguish.
2.2 Touchscreen
The touchscreen, on those models with front panel controls, is a full function display with capacitive
touch sensing. This is a full function Linux desktop; see Raspberry Pi documentation for more details.
With an attached mouse and keyboard, it presents a full function desktop computer. Additional
displays can be connected to the rear of the radio using HDMI connectors.
The front panel display can provide the front panel display for piHPSDR. In this mode it presents the
front panel for your radio, allowing completely standalone operation.
To Next Page
Loading...